header-ads

ISO Standards for the Oil and Gas Industry

ISO standards for use in oil and gas industry |ABNT, ANSI, API, AS, BSI, CSA, NORSOK, NF, GOST, SAC

ISO Standards 2020 Update: What You Need to Know

The International Organization for Standardization (ISO) has recently released an update to its standards for use in the oil and gas industry. The ISO Standards 2020 update includes new and revised standards that aim to improve the safety, efficiency, and sustainability of the oil and gas industry. In this blog post, we'll take a look at some of the key changes and updates included in the ISO Standards 2020 update.

Key Changes and Updates

Some of the key changes and updates included in the ISO Standards 2020 update for use in the oil and gas industry include:

  • New standard for risk management in the oil and gas industry: ISO 31010:2019 provides guidance on risk management in the oil and gas industry, including the identification, assessment, and control of risks. This standard can be used by oil and gas companies, as well as other organizations involved in the industry.
  • Revised standard for oil and gas upstream production operations: ISO 10418:2020 updates the previous version of this standard, which covers the design, operation, and maintenance of upstream production operations in the oil and gas industry. The revised standard includes new requirements for safety, efficiency, and sustainability.
  • Revised standard for oil and gas downstream operations: ISO 15926-7:2020 updates the previous version of this standard, which covers the design, operation, and maintenance of downstream operations in the oil and gas industry. The revised standard includes new requirements for data management and digitalization, as well as updated guidance on safety and sustainability.

Benefits of the ISO Standards 2020 Update

The ISO Standards 2020 update for use in the oil and gas industry offers several benefits to companies and organizations in the industry. Some of the key benefits of the update include:

  • Improved safety: The new and revised standards included in the ISO Standards 2020 update aim to improve the safety of oil and gas operations, helping to reduce the risk of accidents and incidents.
  • Increased efficiency: The new and revised standards provide guidance on best practices and efficient methods for oil and gas operations, helping companies to save time and resources.
  • Greater sustainability: The new and revised standards include requirements for sustainability, helping companies to reduce their environmental impact and promote responsible resource use.

By following the guidelines outlined in the ISO Standards 2020 update for use in the oil and gas industry, companies and organizations can improve safety, efficiency, and sustainability in their operations.

International Standards Organizations

There are several international organizations that are responsible for developing and maintaining standards in various industries. Some of the most well-known organizations include:

  • ABNT - Associação Brasileira de Normas Técnicas (Brazilian Association of Technical Standards): This organization is responsible for developing and maintaining standards in Brazil across a wide range of industries, including construction, energy, and telecommunications.
  • ANSI - American National Standards Institute: This organization is responsible for coordinating the development of standards in the United States across a wide range of industries, including healthcare, information technology, and energy.
  • API - American Petroleum Institute: This organization is focused on developing and maintaining standards in the oil and gas industry, including standards for equipment, operations, and safety.
  • AS - Standards Australia: This organization is responsible for developing and maintaining standards in Australia across a wide range of industries, including construction, energy, and transportation.
  • BSI - British Standards Institution: This organization is responsible for developing and maintaining standards in the United Kingdom across a wide range of industries, including healthcare, information technology, and construction.
  • CSA - Canadian Standards Association: This organization is responsible for developing and maintaining standards in Canada across a wide range of industries, including healthcare, information technology, and construction.
  • NORSOK - Norwegian Forum for Standardisation: This organization is responsible for developing and maintaining standards in Norway, specifically in the oil and gas industry, including standards for equipment, operations, and safety.
  • NF - Association Française de Normalisation (French Association for Standardization): This organization is responsible for developing and maintaining standards in France across a wide range of industries, including construction, energy, and transportation.
  • GOST - State Standard of the Russian Federation: This organization is responsible for developing and maintaining standards in Russia across a wide range of industries, including construction, energy, and transportation.
  • SAC - Standardization Administration of China: This organization is responsible for developing and maintaining standards in China across a wide range of industries, including construction, energy, and transportation.

These organizations play a crucial role in maintaining quality, safety and efficiency across various industries by developing and promoting standards, guidelines and codes of practice. Companies and organizations operating in different countries have to comply with these standards in order to meet the requirements of national and international regulations.


These organizations develop and publish ISO standards that are used in the oil and gas industry to ensure the safety, quality, and efficiency of operations. Some examples of ISO standards that are relevant to the oil and gas industry include ISO 29001 (Quality management systems for the petroleum, petrochemical and natural gas industry), ISO 10417 (Petroleum and natural gas industries - Drilling and production equipment - Safety requirements for offshore structures), and ISO 15136 (Petroleum and natural gas industries - Surface production installations - Design and operation).

It is important for companies in the oil and gas industry to adhere to these standards in order to maintain a high level of safety and quality, as well as to ensure that their operations are consistent with international best practices.


ISO Standards for the Oil and Gas Industry

There are several ISO standards that are relevant to the oil and gas industry. These include:


ISO Standards 2020 update

Sr. Codes Discription
1 ISO 10418 Process safety systems (Rev)
2 ISO 10419 Replaced by API Spec 6AV2
3 ISO 10423 Wellhead and christmas tree equipment
4 ISO 12489 Reliability modelling/safety systems
5 ISO 13354 Shallow gas diverter equipment
6 ISO 13533 Drill-through equipment (BOPs)
7 ISO 13534 Hoisting equipment – care/maintenance
8 ISO 13535 Hoisting equipment – specification
9 ISO 13626 Drilling and well-servicing structures
10 ISO 13702 Control and mitigation of fires and explosions
11 ISO 13703 Offshore piping systems
12 ISO 14224 Reliability and maintenance data
13 ISO 14692-1 GRP piping vocabulary, symbols, applications and materials
14 ISO 14692-2 GRP piping qualification and manufacture
15 ISO 14692-3 GRP piping system design
16 ISO 14692-4 GRP piping fabrication, installation and operation
17 ISO 14693 Drilling equipment
18 ISO 15138 Heating, ventilation and air-conditioning (Rev)
19 ISO 15156 Cracking-resistant materials for use in H2S environments, Parts 1-3
20 ISO 15544 Emergency response
21 ISO 15663 Life cycle costing, Parts 1–3
22 ISO 16901 Risk assessment in the design of onshore LNG installations
23 ISO 16903 Characteristics of LNG influencing design and material selection
24 ISO 16904 LNG Marine Transfer Arms
25 ISO 17177 Unconventional LNG transfer systems
26 ISO 17292 Metal ball valves
27 ISO 17776 Major Accident hazard management during design
28 ISO 17781 Duplex stainless steel materials testing
29 ISO 17782 Qualification of manufacturers of special materials (New)
30 ISO 17945 Materials resistant to sulfide stress cracking
31 ISO 17969 Guidelines on competency for personnel
32 ISO 18683 Systems and installations for supply of LNG as fuel to ships
33 ISO 19008 Standard Cost Coding System
34 ISO 19277 Qualification testing for coating under insulation (New)
35 ISO 20321 Powered elevators (New)
36 ISO 20815 Production assurance and reliability management (Rev)
37 ISO 21457 Materials selection
38 ISO 23936-1 Thermoplastics
39 ISO 23936-2 Elastomers
40 ISO 27469 Method of test for offshore fire dampers
41 ISO 29001 Sector-specific quality management systems
42 ISO 3977-5 Gas turbines – procurement
43 ISO 10428 Sucker rods
44 ISO 10431 Pumping unites
45 ISO 10434 Bolted bonnet steel gate valves
46 ISO 10436 Replaced by API Std 611
47 ISO 10437 Special-purpose steam turbines
48 ISO 10438 Lubrication, shaft-sealing and control-oil systems, Parts 1–4
49 ISO 10439 Centrifugal compressors
50 ISO 10440-1 Rotary-type positive-displacement process compressors (oil-free)
51 ISO 10440-2 Rotary PD packaged air compressors
52 ISO 10441 Flexible couplings – special
53 ISO 10442 Integrally geared air compressors
54 ISO 12211 Spiral plate heat exchangers
55 ISO 12212 Hairpin heat exchangers
56 ISO 13631 Reciprocating gas compressors
57 ISO 13691 High speed enclosed gear units
58 ISO 13704 Calculation of heater tube thickness
59 ISO 13705 Fired heaters for general service
60 ISO 13706 Air-cooled heat exchangers
61 ISO 13707 Reciprocating compressors
62 ISO 13709 Centrifugal pumps
63 ISO 13710 Reciprocating positive displacement pumps
64 ISO 14691 Flexible couplings – general
65 ISO 15547 Heat exchangers, Parts 1-2
66 ISO 15649 Piping
67 ISO 15761 Steel valves DN 100 and smaller
68 ISO 16812 Shell and tube heat exchangers (Rev)
69 ISO 16901 Risk assessment of onshore LNG installations
70 ISO 16961 Internal coating and lining of steel storage tanks
71 ISO 17348 Materials Selection in CO2 Environment for casing,tubing and downhole equipments
72 ISO 17349 Streams containing high levels of CO2
73 ISO 18624 Guidance for design of LNG storage tanks (New)
74 ISO 18796-1 Internal coating and lining of process vessels (New)
75 ISO 20088-1 Resistance to cryogenic spillage of insulation materials– Liquid phase
76 ISO 20088-2 Resistance to cryogenic spillage of insulation materials -Vapor phase (New)
77 ISO 20088-3 Resistance to cryogenic spillage of insulation materials -High pressure jet exposure (New)
78 ISO 20257-1 General requirements for floating LNG installations (New)
79 ISO 20257-2 Specific requirements for FSRU (New)
80 ISO 21049 Centrifugal and rotary pumps shaft sealing
81 ISO 23251 Replaced by API Std 521 (Rev)
82 ISO 24817 Composite repairs for pipework
83 ISO 25457 Flares details
84 ISO 27509 Compact flanged connections
85 ISO 28300 Venting of storage tanks
86 ISO 28460 LNG – Ship to shore interface
87 ISO 10855-1 Offshore containers design, manufacture and marking (New)
88 ISO 10855-2 Offshore containers lifting sets (New)
89 ISO 10855-3 Offshore containers periodic inspection (New)
90 ISO 18647 Modular drilling rigs
91 ISO 18797-1 Elastomeric coating of risers - polychloroprene or EPDM
92 ISO 19900 General requirements for offshore structures (Rev)
93 ISO 19901-1 Metocean design and operating considerations
94 ISO 19901-2 Seismic design procedures and criteria
95 ISO 19901-3 Topsides structure
96 ISO 19901-4 Geotechnical and foundation design
97 ISO 19901-5 Weight control
98 ISO 19901-6 Marine operations (Rev)
99 ISO 19901-8 Marine soil investigations
100 ISO 19901-9 Structural Integrity Management (New)
101 ISO 19902 Fixed steel offshore structures (Rev)
102 ISO 19903 Fixed concrete offshore structures (Rev)
103 ISO 19904-1 Monohulls, semi-submersibles and spars (Rev)
104 ISO 19905-1 Site-specific assessment of jack-ups
105 ISO 19905-2 Jack-ups commentary
106 ISO 19905-3 Site-specific assessment of mobile offshore units
107 ISO 19906 Arctic offshore structures (Rev)
108 ISO 35101 Arctic Working environment
109 ISO 35102 Arctic Operations Escape, evacuation and rescue (New)
110 ISO 35103 Arctic Environmental monitoring
111 ISO 35104 Arctic operations - Ice management (New)
112 ISO 35105 Arctic material (New)
113 ISO 35106 Arctic metocean, ice and seabed data
114 ISO 13624 Marine drilling riser systems, Parts 1-2
115 ISO 13625 Marine drilling riser couplings
116 ISO 19901-7 Stationkeeping systems
117 ISO 13628-1 Subsea production systems
118 ISO 13628-2 Subsea flexible pipe systems
119 ISO 13628-3 Subsea TFL pumpdown systems
120 ISO 13628-4 Subsea wellhead and tree equipment
121 ISO 13628-5 Subsea control umbilicals
122 ISO 13628-6 Subsea production controls
123 ISO 13628-7 Completion/workover riser system
124 ISO 13628-8 ROT and interfaces
125 ISO 13628-9 ROT intervention systems
126 ISO 13628-10 Bonded flexible pipe
127 ISO 13628-11 Flexible pipe systems for subsea and marine applications
128 ISO 13628-15 Subsea structures and manifolds
129 ISO 10400 Calculations for OCTG performance properties (Rev)
130 ISO 10405 Care/use of casing/tubing
131 ISO 10407-1 Drill stem design
132 ISO 10407-2 Inspection and classification of drill stem elements
133 ISO 10414-1 Field testing of water-based fluids
134 ISO 10414-2 Field testing of oil-based drilling fluids
135 ISO 10416 Drilling fluids – lab testing
136 ISO 10417 Subsurface safety valve systems
137 ISO 10422 Replaced by API Spec 5B
138 ISO 10424-1 Rotary drill stem elements
139 ISO 10424-2 Threading and gauging of connections
140 ISO 10426-1 Well cementing
141 ISO 10426-2 Testing of well cements
142 ISO 10426-3 Testing of deepwater well cement (Rev)
143 ISO 10426-4 Atmospheric foamed cement slurries (Rev)
144 ISO 10426-5 Shrinkage and expansion of well cement
145 ISO 10426-6 Static gel strength of cement formulations
146 ISO 10427-1 Bow spring casing centralizers
147 ISO 10427-2 Centralizer placement and stop-collar testing
148 ISO 10427-3 Performance testing of cement float equipment
149 ISO 10432 Subsurface safety valves
150 ISO 10433 Replaced by API Spec 6AV1
151 ISO 11960 Casing and tubing for wells
152 ISO 11961 Drill pipe (Rev)
153 ISO 12835 Qualification of casing connections for thermal wells
154 ISO 13085 Tubing aluminium alloy pipes
155 ISO 13500 Drilling fluids
156 ISO 13501 Drilling fluids – processing systems evaluation
157 ISO 13503-1 Measurement of viscous properties of completion fluids
158 ISO 13503-2 Measurement of properties of proppants
159 ISO 13503-3 Testing of heavy brines
160 ISO 13503-4 Measurement of stimulation & gravelpack fluid leakoff
161 ISO 13503-5 Measurement of long term conductivity of proppants
162 ISO 13503-6 Measuring leak-off of completion fluids under dynamic conditions
163 ISO 13678 Thread compounds
164 ISO 13679 Casing and tubing connections testing (Rev)
165 ISO 13680 CRA seamless tubes for casing & tubing
166 ISO 14310 Packers and bridge plugs
167 ISO 14998 Accessory completion equipment
168 ISO 15136 Progressing cavity pump systems, Parts 1-2
169 ISO 15463 Field inspection of new casing, tubing and plain end drill pipe
170 ISO 15464 Gauging and inspection of threads
171 ISO 15551-1 Electric submersible pump systems for artificial lift
172 ISO 15546 Aluminium alloy drill pipe
173 ISO 16070 Lock mandrels and landing nipples
174 ISO 16530-1 Well integrity manual
175 ISO 17078-1 Side-pocket mandrels
176 ISO 17078-2 Flow control devices for side-pocket mandrels
177 ISO 17078-3 Latches & seals for side-pocket mandrels & flow control devices
178 ISO 17078-4 Side-pocket mandrels and related equipment
179 ISO 17824 Sand control screens
180 ISO 20312 Design of aluminium drill string
181 ISO 27627 Aluminium alloy drill pipe thread gauging
182 ISO 28781 Subsurface tubing mounted formation barriers
183 ISO 3183 Steel pipe for pipeline transportation systems
184 ISO 12490 Actuation, mechanical integrity and sizing for pipeline valves
185 ISO 12736 Wet thermal insulation coatings
186 ISO 12747 Pipeline life extension
187 ISO 13623 Pipeline transportation systems
188 ISO 13847 Welding of pipelines
189 ISO 14313 Pipeline valves
190 ISO 14723 Subsea pipeline valves
191 ISO 15589-1 Cathodic protection of on-land pipelines
192 ISO 15589-2 Cathodic protection for offshore pipelines
193 ISO 15590-1 Pipeline induction bends (Rev)
194 ISO 15590-2 Pipeline fittings
195 ISO 15590-3 Pipeline flanges
196 ISO 15590-4 Pipeline factory cold bends (New)
197 ISO 16440 Steel cased pipelines
198 ISO 16708 Pipeline reliability-based limit state design
199 ISO 19345-1 Full-life cycle integrity management for onshore pipeline (New)
200 ISO 19345-2 Full-life cycle integrity managemen for offshore pipeline (New)
201 ISO 20074 Geological hazards risk management of pipelines (New)
202 ISO 21329 Test procedures for pipeline mechanical connectors
203 ISO 21809-1 Polyolefin coatings (3-layer PE and 3-layer PP) (Rev)
204 ISO 21809-2 Fusion-bonded epoxy coatings
205 ISO 21809-3 Pipeline field joint coatings (Amd1)
206 ISO 21809-4 Polyethylene coatings (2-layer PE)
207 ISO 21809-5 Pipeline external concrete coatings
208 ISO 21809-11 Pipeline Coating repairs (New)

Post a Comment

0 Comments